Acer XV282K User Manual Download

Page: 26 / 31

English

Audio

Mode - Stardard

Picture

Volume

Enter

Move

Oﬀ

Mute

Color

OSD

System

Audio

Gaming

Press the MENU key to open the OSD.

2. Toggle the joystick to the up or down to select Audio from the OSD.Then toggle to the

right to

to the function you

wish to adjust and press the joystick to enter it.

3. Toggle to the left or right

to adjust the sliding scales or choose function.

Volume: Adjust the volume

5. Mute:To choose mute on/off .

Gaming

Mode - User

Picture

Color

Over Drive

Normal

ADM FreeSync Premium

Oﬀ

Enter

Move

Refresh Rate Num

Oﬀ

Ultra-Low Latency

Oﬀ

Aim Point

OSD

System

Audio

Gaming

Press the MENU key to open the OSD.

2. Toggle the joystick to the up or down to select Gaming from the OSD.Then toggle to

the right to

to the function you

wish to adjust and press the joystick to enter it.

3. Toggle to the left or right to control functions.
4.

Over Drive: Select Off, Normal or Extreme.

5. AMD FreeSync Premium(DP/DP ALT): To control support AMD FreeSync Premium or

not, default is On.

---------------------------------------------------------------------------------------------------------

Note:

1. If AMD FreeSync Premium is “ON”, then the Over Drive selection is set to

“Normal” automatically.
2. If AMD FreeSync Premium is “OFF”, then the user can set Over Drive to

either one of the three settings including: (a) Extreme (b) Normal (c) Off.

Summary of Contents for XV282K
































Search results

Summary of Contents for XV282K

Reviews:

Related manuals for XV282K

Brands by name

Popular brands

Acer XV282K, User Manual

Search results

Summary of Contents for XV282K

Reviews:

Related manuals for XV282K

Brands by name

Popular brands