manualshive.com logo in svg

Acer XF250Q, User Manual, Page: 26 / 27

Share
Download
Acer XF250Q User Manual Download Page 26

English

15

1.  The Setting menu can be used to select the input and other important settings.
2. 

Press the MENU key to open the OSD.

3. 

Using the ▲/▼ keys, select Setting from the OSD. Then navigate to the setting you 

wish to adjust.

4. 

Use the ◄/► keys to select the setting.

5.  Input: Select the source from DVI, HDMIor DP.

6.  Auto Source: Default is "on", support auto source.
7.  DP Format :Default is DP1.2, can selection DP support DP1.1 or DP1.2 format.
8.  PIP/PBP settings.
9.  HDMI Black level setting.
10.  Wide mode: You can select which screen aspect you are using. The options are Aspect 

and Full.

11.  DDC/CI: Allows the monitor settings to be set through the software on the PC.

----------------------------------------------------------------------------------------------------------- 

Note: 

DDC/CI, short for Display Data Channel/Command Interface, which allows monitor controls 

to be sent via software.

12.  Quick start mode setting.

Product information

Mode - User

Gaming

Picture

Color

Main Source

DVI_D

Audio

OSD

Reset All Settings

System

H/V Frequency

H:  67KHz V:  60Hz
Mode

Normal

Resolution

1920x1080

Quick Start Mode

Information

Series Number
MML 3451 80060290001 4212

Save Settings to...

 

1. 

Press the MENU key to open the OSD.

2. 

Using the ▲/▼ keys, select Information to view the basic information for your monitor 

and current input.

3.  Reset all settings: Reset the custom color settings to factory defaults.

Summary of Contents for XF250Q




























Reviews:

No comments