![background image](http://html2.mh-extra.com/html/acer/veriton-x4610g/veriton-x4610g_service-manual_5729532012.webp)
4
Chapter 1
Rear I/O connectors
•
1 D-Sub port
•
1 DVI-D port
•
6 USB 2.0 ports
•
2 USB 3.0 ports(reserve by BOM option, default w/o)
•
1 RJ45 LAN port
•
3 mini audio jacks
•
At least five HD audio in/output
•
2 PS2 keyboard/mouse connector
•
1 serial port
On-board connectors
•
1 LGA 1155 CPU socket
•
4 DDR3 DIMM memory sockets
•
1 PCI Express x16 slot
•
PCI Express x 1 slot
•
3 SATA connectors( 6Gb/s*1 and 3Gb/s*2 for Q65 and reserve 3Gb/s*1 for BOM option. Must use
different color to define SATAIII and SATAII. )
•
Four 2*5 pin Intel FPIO specification USB pin connectors (follow Intel FPIO standard Specification)
•
One 2*5 pin Intel FPIO spec. Microphone In/ Headphone Out pin connectors
•
One 4 pin CPU Fan connector
•
One 3 pin System Fan connector with linear circuit
•
One 4 pin SPDIF header closed to PCIEx16 slot
•
One 24 pin ATX interface PS3/PS2 SPS connector.
•
One 2*7 pin front panel IO header
•
One Jumper for clear CMOS
•
One on board buzzer
•
One 2pin OBR header
•
Two reserved 2pin GPIO connector
•
One Serial port header (COM2) (near rear IO is preferable)
•
One 2pin Intrusion Alarm connector
•
One LPT 2*13pin header (near rear IO is preferable)
•
One 2*4 pin internal speaker header
•
One 3pin ME enable/disable connector (with 1 jumper)
•
Color management for on board connecter (please refer to Acer spec)
•
Header Naming should follow MB Header Naming
System BIOS
•
Kernel: AMI Aptio Kernel with Acer skin/copyright.
•
Type:
•
Use SPI Flash
•
Size: 64M
Summary of Contents for Veriton X4610G
