Acer Veriton S480, Service Manual

Page: 88 / 90

Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
Step 6:
Step 7:
Picture6
Step 8:
Step 9:
Step 10:
1-2: Create SATA RAID 1
Shut down the EUT, unplug the power cable,connect two SATA HDDS to EUT , check the
EUT all devices are connect/plug ok
Press "PWR-BTTN" to power on the EUT,Load BIOS default setting .
At "Integrated_Peripherals" page "OnChip SATA Type" item set is as "RAID" mode,save
and exit.
During BIOS post, press <Ctrl-I> to enter into Intel RAID setup utility.
Select "1" to enter create RAID mode ,if there is no enough avalable space (there was exist a
Raid , delete it ).
Create RAID 1 Mode,enter the RAID name,such as "MyRaid1",default is"Volume0".
Select "RAID1(Mirror)" at "RAID Level".
You can select the "Strip Size" and define RAID capacity in "Capactity".
Press "Create Volume" to create RAID1,it will pop the warning message that all data
will be lost,"press "Y" to confirm it.
It will back to create RAID interface,then press "ESC" or select 4 to exit and install
OS.