32
Chapter 3
Removing the Processor
IMPORTANT:
Before removing a processor from the mainboard, make sure to create a backup file of all
important data.
1.
Release the load lever.
2.
Lift the load lever and load plate to the fully open, upright position (1)
and (2).
3.
Pull out the processor from the socket.
IMPORTANT:
If you are going to install a new processor, note the arrow on the corner to make sure the
processor is properly oriented over the socket.
Summary of Contents for Veriton M680
Page 1: ...i Acer Veriton M680G M688G M680 Service Guide PRINTED IN TAIWAN ...
Page 13: ...Chapter 1 5 Block Diagram ...
Page 50: ...42 Chapter 3 4 Removing the two screws then take out the intrusion alarm assembly ...
Page 66: ...Chapter 5 58 M B Placement Jumper and Connector Information Chapter 5 ...
