32
Chapter 3
Removing the Processor
IMPORTANT:
Before removing a processor from the mainboard, make sure to create a backup file of all
important data.
1.
The processor becomes very hot when the system is on. Allow it to cool off first before handling. Release
the load lever
(1).
2.
Pull the load lever to the fully open, upright position (2)
and lift the load plate (3).
3.
Pull out the processor from the socket.
IMPORTANT:
If you are going to install a new processor, note the arrow on the corner to make sure the
processor is properly oriented over the socket.
Summary of Contents for Veriton M275
Page 1: ...i Acer Veriton M275 Service Guide PRINTED IN TAIWAN ...
Page 12: ...4 Chapter 1 Block Diagram ...
Page 51: ...Chapter 3 43 3 Take out the printer port from chassis 4 Take out the COM port from chassis ...
Page 66: ...Chapter 5 58 M B Placement Jumper and Connector Information Chapter 5 ...
