Acer Veriton 7900Pro Page 106 Service Manual Download

Page: 106 / 116

100

Chapter 4

Parallel/Serial Ports

Execute “Load BIOS Default Settings” in BIOS Setup to confirm ports presence before diagnosing any
parallel/serial ports problems.
Serial or parallel port loop-back test
failed.

1. Make sure that the LPT# or COM# you test is the same

as the setting in BIOS Setup.

2. Loop-back.
3. Main board.

Printing failed.

1. Ensure the printer driver is properly installed. Refer to the

printer service manual.

2. Printer.
3. Printer cable.
4. Main board.

Printer problems.

1. Refer to the service manual for the printer.

Keyboard

Some or all keys on keyboard do not
work.

1. Keyboard

Power Supply

Pressing power switch does not turn off
system. (Only unplugging the power
cord from electrical outlet can turn off the
system.)

1. Ensure the

Soft-off by PWR-BTTN.

in BIOS Setup

Power Management

is not set to Instant-off.

2. Power switch cable assembly

Pressing power switch does not turn on
the system.

1. Ensure the power override switch (situated at the back of

the machine, just above the connector for the power
cable) is not set to OFF.

2. Power switch cable assembly.

Executing software shutdown from
Windows98 Start menu does not turn off
the system. (Only pressing power switch
can turn off the system).

1. Load default settings.
2. Reload software from Recovery CD.

No system power, or power supply fan is
not running.

1. Power Supply
2. Main board

Other Problems

Any other problems.

1. Undetermined Problems

Error Symptom

Action/FRU

Summary of Contents for Veriton 7900Pro





















































































































Search results

Summary of Contents for Veriton 7900Pro

Reviews:

Related manuals for Veriton 7900Pro

Brands by name

Popular brands

Acer Veriton 7900Pro, Service Manual

Search results

Summary of Contents for Veriton 7900Pro

Reviews:

Related manuals for Veriton 7900Pro

Brands by name

Popular brands