manualshive.com logo in svg

Acer Veriton 3700G, User Manual

Share
Download
Acer Veriton 3700G User Manual Download Page 83

77

Recovering your system

If your operating system files are lost or damaged, the recovery process 
will restore your system's original factory default settings or last system 
backup. Your Acer Veriton series computer includes an OBR(One 
Button Recovery) button, a feature that makes restoring your system 
quick and easy. 

OBR works from a hidden partition on your hard drive that contains all 
the information required to restore your system.

There are two modes to recovery your system. One is from system’s 
original settings and another is from system backup. You can press Alt 
+ F10 after the BIOS finishes running the Power On Self Test (POST).

Warning: Initiating the recovery operation while the 
operating system is running will result in abnormal 
shutdown and may make your current OS unstable or 
unusable.

After the POST runs, you have only 1.5 seconds to press Alt + F10. 
Follow all onscreen instructions.

Summary of Contents for Veriton 3700G



















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands