23
Eng
lis
h
Management
Language
ECO Mode
Choose "On" to dim the projector lamp, which will also
lower the power consumption, reduce noise, and extend
the lamp life. Choose "Off" to return to the normal mode.
Test Pattern
Displays the test pattern.
High Altitude
Choose "On" to turn on the High Altitude mode. When
this function is turned on, the projector fans operate at full
speed continuously to cool down the projector’s
temperature.
Turn Off Mode
•
Standard: Enables you to turn off the projector with a
normal turn off process.
•
Instant Resume: Enables you to restart the projector
immediately within 2 minutes after turning it off.
Auto Shutdown
(Minutes)
The projector will automatically shut down while there is
no signal input detected after the time you set.
Menu Display
Time (Seconds)
•
5/15/30: Chooses the length of time the OSD menu
will remain active after your last key press.
•
Manual: The OSD menu remains active. The only way
to launch or exit the OSD menu is by pressing
"MENU".
AC Power On
Selecting "On" enables the function. The projector will
automatically turn on when power is supplied via the
power cord.
Status
If turned on, the I/O port message displays on the upper
right corner.
Lamp Hour Elapse Displays the lamp’s elapsed operating time (in hours).
Lamp Reminding
Choose this function to show or hide warning message
when the changing lamp message is displayed. The
message will show up 30 hours before end of lamp life.
Lamp Hour Reset
Press "ENTER" after choosing "Yes" to reset the lamp hour
counter to 0 hours.
Reset
Press "ENTER" after choosing "Yes" to return the display
parameters on Management menu to the factory default
settings.
Language
Sets a language for the OSD menus. Use
to
select your preferred language.