Acer V193W, Service Manual

Page: 22 / 49

Service Guide Acer V193W
OSD Message
a. Outline
b. The Description For OSD Message
Item Description
Auto Config
Please Wait
When Analog signal input, if User Press Hot-Key “Auto”, will show this message, and the
monitor do the auto config function.
Input Not
Supported
When the Hsync Frequency, Vsync Frequency or Resolution is out of the monitor
support range, will show this message. This message will be flying.
Cable Not
Connected
Analog-Only Model: When the video cable is not connected, will show this message.
This message will be flying.
No Signal
Analog-Only Model: When the video cable is connected, but there is no active signal
input, will show this message, then enter power saving.
Logo
When the monitor is power on, the LOGO will be showed in the center, and disappear slowly.
How To Optimize The DOS-Mode
Plug And Play
Plug & Play DDC2B Feature
This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the
monitor to inform the host system of its identity and, depending on the level of DDC used, communicate
additional information about its display capabilities.
The DDC2B is a bi-directional data channel based on the I²C protocol. The host can request EDID information
over the DDC2B channel.
This monitor will appear to be non-functional if there is no video input signal. In order for this monitor
22