Acer UM.QB8AA.001 User Manual Download Page 21

Page: 21 / 34

English

Installation

1. Turn off your computer and unplug your computer's power cord.

Connect the signal cable to the HDMI (optional) and /or DP (optional) input socket of the monitor, and the HDMI

(optional) and /or DP (optional) output socket of the graphics card on the computer. Then tighten the thumbscrews

on the signal cable connector.

USB Type C Cable (Optional, USB Type-C input models only)

Connect one end of the USB type C cable (optional) to your computer and connect the other end to your electric

devices.

Connect the USB Cable(Optional)

Connect the USB 3.0 cable to port for fast charge.

Connect the USB 3.0 cable to port.

5. Optional: Connect the audio input socket (AUDIO IN) of the LCD monitor and the line-out port on the computer with

the audio cable.

6. Insert the monitor power cable into the power port at the back of the monitor.

Plug the power cords of your computer and your monitor into a nearby electrical outlet.

Visit Acer Support website to download IR webcam driver

https://www.acer.com/worldwide/support/
Note:
1. Audio output is only for audio output model. Please check user manual for more instruction.

RJ45:support 10M/100M/1000Mbps

USB Type C

USB

*POWER CORD specifications refer to page15

*For the installation of replaceable parts, please refer to the above installation instructions.

*Users may go to the local service network to replace /purchase the qualified replaceable parts.

For local service centers and service contacts, please refer to https://www.acer.com/ac/en/US/content/support

Daisy-chain function

DP OUT

Summary of Contents for UM.QB8AA.001



































Search results

Summary of Contents for UM.QB8AA.001

Reviews:

Related manuals for UM.QB8AA.001

Brands by name

Popular brands

Acer UM.QB8AA.001, User Manual

Search results

Summary of Contents for UM.QB8AA.001

Reviews:

Related manuals for UM.QB8AA.001

Brands by name

Popular brands