Acer UM.HX2AA.V02 User Manual Download Page 27

Page: 27 / 31

English

Audio

Mode - Stardard

Picture

Volume

Enter

Move

Oﬀ

Mute

Color

OSD

System

Save Settings to...

Audio

Gaming

Press the MENU key to open the OSD.

2. Toggle the joystick to the up or down to select Audio from the OSD.Then toggle to the

right to

navigate to the element you wish to adjust and press the joystick to enter it.

3. Toggle to the left or right to adjust the sliding scales.
4.

Volume: Adjust the volume

Mute:To choose mute on/off .

Gaming

Mode - User

Picture

Color

Over Drive

Normal

FreeSync Premium

Oﬀ

Enter

Move

VRB

Oﬀ

Aim Point

OSD

System

Save Settings to...

Audio

Gaming

Oﬀ

Refresh Rate Num

Press the MENU key to open the OSD.

2. Toggle the joystick to the up or down to select Gaming from the OSD.Then toggle to

the right to

navigate to the element you wish to adjust and press the joystick to enter it.

3. Toggle to the left or right to control functions.
4.

Over Drive: Select Off, Normal or Extreme.

FreeSync Premium: To control support FreeSync Premium or not, default is On.

---------------------------------------------------------------------------------------------------------

Note:

1. If FreeSync Premium is “ON”, then the Over Drive selection is set to “Normal”

automatically.
2. If FreeSync Premium is “OFF”, then the user can set Over Drive to either

one of the three settings including: (a) Extreme (b) Normal (c) Off.

6. Refresh rate num: Display the panel’s current refresh rate on the screen.

Summary of Contents for UM.HX2AA.V02
































Search results

Summary of Contents for UM.HX2AA.V02

Reviews:

Related manuals for UM.HX2AA.V02

Brands by name

Popular brands

Acer UM.HX2AA.V02, User Manual

Search results

Summary of Contents for UM.HX2AA.V02

Reviews:

Related manuals for UM.HX2AA.V02

Brands by name

Popular brands