Acer TRAVELMATE TravelMate 2350, Service Manual

Page: 38 / 90

32 Chapter 2
Advanced
The Advanced screen contains parameters involving your hardware devices. It also provides advanced
settings of the system.
The table below describes the parameters in the screen. Settings in boldface are the default and suggested
parameter settings.
Description Option
FIR I/O Settings Sets the base I/O address and IRQ for Infrared
port. Disabled
, COM1, 3F8, IRQ4/
COM2, 2F8, IRQ3/ COM3, 3E8,
IRQ4/ COM4, 2E8, IRQ3
DMA Setting for Fast IR Sets a DMA channel for the printer to operate in
ECP mode. This parameter is enabled only if
Mode is set to ECP.
DMA1, DMA2,
DMA3
,
Mode Setting NA Normal (16550), IrDA (HPSIR),
ASK IR,
FAST IR
Insyde Software SCU May 20, 2003 5:40:09 AM
Main Advanced Security Boot Exit
-----------------------------FIR Ports------ --- -----------------
-----FIR I/O settings--- -Mode Setting for IRDA-
Infrared Port (FIR)
( ) Disabled ( ) Normal (16550)
( ) COM1,3F8,IRQ4 ( ) IrDA (HPSIR)
Parallel Port (LPT)
(
£»
) COM2,2F8,IRQ3 ( ) ASK IR
( ) COM3,3E8,IRQ4 (
£»
) FAST IR
£
Legacy USB Support
( ) COM4,2E8,IRQ3
DMA Setting For FIR
( ) DMA1
( ) DMA2
(
£»
) DMA3
OK Cancel
<Tab> <Right> <Left> fo r block select. <Up> <Down> for item select.
< Enter> for accept. <Cancel> <Esc> for reject. <Alt> activates accelerators.
<Space> for Enable or Disable.
fi ƒ¡⁄˘:
§R £
§R £
§R £
§R £
§R £
§R £
§R £
§R £
§R £
§R £
§R £
§R £
§R £
§R £
§R £
§R £
§R £
§R £
§R £
§R £
§R £
§R £
§R £
§R £
§R £
§R £
§R £
§R £
§R £
§R £
§R £
§R £
§R £
§R £
§R £