manualshive.com logo in svg

Acer TravelMate P215-52, Service Manual, Page: 88 / 97

Share
Download
Acer TravelMate P215-52 Service Manual Download Page 88

Machine Maintenance Procedures

1-82

Replacing the Heatsink

0

IMPORTANT

:

+

Apply approved thermal grease and ensure all heat pads are in position 
before replacing the module.

CAUTION

:

!

Use caution when applying thermal grease. Thermal grease may cause 
damage to the mainboard. 

The following thermal grease types are approved for use:



Silmore GP50



Honeywell



Jet Motor 7762

The following thermal pads are approved for use:



Eapus XR-PE

1. Remove all traces of thermal grease from CPU (or GPU) using a lint-free cloth or 

cotton swab and Isopropyl Alcohol, Acetone, or other approved cleaning agent.

2. Apply small amount of thermal grease to center of CPU.

NOTE:

NOTE

:

Force used during installation of heatsink is sufficient to spread grease evenly over 
CPU top.

3. Place the heatsink (A) on the mainboard (

Figure 1-110

).

Figure 1-110. Replacing the Heatsink

A

Summary of Contents for TravelMate P215-52


































































































Reviews:

No comments