Acer TravelMate alpha-550 Service Manual Download Page 51

Page: 51 / 132

Chapter 2

Boot

The Boot screen allows you to set the order in which the system looks for bootable devices on startup.

The table below describes these devices.

NOTE:

A plus (+) sign may be shown in front of a device. You can press

to “expand” the device and see

sub-items in this category.

Parameter

Description

Removable Devices

The computer attempts to boot fro the removable device (e.g., floppy drive). If
unsuccessful, the system goes to the next device in the list.

Hard Drive

The computer attempts to boot from the hard disk. If unsuccessful, the system goes to the
next device in the list.

CD-ROM/DVD Drive

The computer attempts to boot from the CD or DVD drive (looks for a bootable CD or
DVD.)

Accton Network Boot

The computer attemptes to boot from LAN.

Accton Network Boot

Summary of Contents for TravelMate alpha-550





































































































































Search results

Summary of Contents for TravelMate alpha-550

Reviews:

Acer TravelMate alpha-550, Service Manual, Page: 51 / 132

Search results

Summary of Contents for TravelMate alpha-550

Reviews: