58
Chapter 3
13.
Detach the LCD panel from the upper case assembly.
14.
Remove the four screw caps of the LCD bezel.
15.
Remove the four screws that secure the LCD bezel.
16.
Remove the LCD bezel from the LCD module.
17.
Disconnect the inverter power cable and the LVDS cable from the inverter board.
18.
Remove the eight screws that secure the LCD.
19.
Remove the LCD from the LCD cover.
20.
Tear off the tapes on the antenna cable.
21.
Tear off the tapes on the antenna brackets.
22.
Remove the two screws that secure the left and right antenna bracket.
Summary of Contents for TravelMate 8100
