manualshive.com logo in svg

Acer TravelMate 6592 Series, Service Manual, Page: 23 / 148

Share
Download
Acer TravelMate 6592 Series Service Manual Download Page 23

Chapter 1

13

NOTE:

1. 

Charging:

 The light shows amber when the battery is charging. 2.

 Fully charged:

 The light shows 

green when in AC mode.

Easy-Launch Buttons

Located above the keyboard are four buttons. These buttons are called easy-launch buttons. They are: mail 

Web browser, Empowering Key “

“and one user-programmable button.

Press “

 “ to run the Acer Empowering Technology. The mail and Web browser buttons are pre-set to email 

and Internet programs, but can be reset by users. To set the Web browser, mail and programmable buttons, 
run the Acer Launch Manager. 

Battery

Lights up when the battery is being 
charged.

Bluetooth

Indicates the status of Bluetooth 
communication.

Wireless LAN

Indicates the status of wireless LAN 
communication.

Launch key

Default application

Acer Empowering Technology (user-programmable)

P

User-programmable

Web browser

Internet browser (user-programmable)

Mail

Email application (user-programmable)

Icon

Function

Description

Summary of Contents for TravelMate 6592 Series





















































































































































Reviews:

No comments