Chapter 2
43
Advanced
The System Devices screen contains parameters involving your hardware devices. It also provides advanced
settings of the system.
The table below describes the parameters in the screen. Settings in boldface are the default and suggested
parameter settings.
Parameter
Description
Options
Internal TouchPad
Determines whether or not to disable the internal
touchpad of a PS/2 pointing device is connected.
Both
or Auto
Infrared Port (FIR)
Sets the interrupt request of the serial port. Please
set the parameter to “Enabled” if you need to use
FIR under Windows operation system.
Disabled/
Enabled/ Auto
Base I/O address/IRQ
Sets the I/O address of the Infrared port.
3F8h/IRQ4; 2F8h/IRQ3; 2E8h/IRQ3
DMA
Sets a DMA channel for the printer to operate in
disabled mode.
DMA1/ DMA3
Parallel Port
Enables, disables or auto detects the parallel port.
Enabled
/Disabled/Auto
Mode
Sets the operation mode of the parallel port.
ECP
, EPP, Normal or Bi-directional
Base I/O address/
Sets the I/O address of the parallel port. This
parameter is enabled only if Mode is set to ECP or
Bi-directional.
378h
, 278h or 3BCh
Interrupt
Sets the interrupt request of the parallel port.
IRQ 7
or IRQ5
DMA Channel
Sets a DMA channel for the printer to operate in
ECP mode. This parameter is enabled only if Mode
is set to ECP.
DMA3
or DMA1
Summary of Contents for TravelMate 430
