English
LR
6
044
1
&
86
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1.
To clean the LCD monitor screen:
Turn off the LCD monitor and unplug the power cord.
Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2.
Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely
damage it.
3.
Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4.
Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform
servicing of any nature.
5.
Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor
outside this range may result in permanent damage.
6.
Immediately unplug your monitor and call an authorized technician if any of the following circumstances
occur:
Monitor-to-PC signal cable is frayed or damaged.
Liquid spills onto the LCD monitor or the monitor is exposed to rain.
The LCD monitor or case is damaged.
Package contents
Attaching the monitor to the base
1.
Remove the monitor from the packaging.
2.
Attach the footstand to the base. (for selected models)
3.
Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)
4.
Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected
models)
Connecting your monitor to a computer
1.
Turn off your computer and unplug your computer's power
cord.
2. Connect the signal cable to the DP (optional)
DP (optional)
output
the computer. Then tighten
the signal
cable connector.
Connect the USB 3.0 cable to port for fast charge.
Connect the USB 3.0 cable to port.
back of the monitor.
into a nearby electrical outlet.
input socket of the monitor, and the
socket of the graphics card on
the thumbscrews on
LCD
monitor
Power cord
DP cable
(optional)
USB cable
(optional)
Quick start
guide
USB3.0 port
-supporting
fast charge
USB3.0 port
USB
USB
3. Connect the USB Cable(Optional)
4. Insert the monitor power cable into the power port at the
5. Plug the power cords of your computer and your monitor
G
‐
SYNC
Experience:
G
‐
SYNC
requires
an
NVIDIA
GeForce
GTX650Ti
BOOST
GPU
or
higher.
For
more
information,
visit
the
nVidia
®
website:
http://www.nvidia.com/page/home.html
