Acer Power SP, Service Manual

Page: 60 / 72

54 Chapter 4
IRQ Setting Error
Expansion ROM Allocation Fail
I/O Resource Conflict(s)
Memory Resource Conflict(s) 1. Load default settings in Setup.
2. Enter BIOS Setup and set the
Reset Resource
Assignments
of the
PnP/PCI Options
to Yes,
then reboot the system.
3. Remove all adapter cards that are NOT factory-
installed, then reboot the system
PCI Device Error 1. Load default settings in Setup.
2. Enter BIOS Setup and set the
Reset Resource
Assignments
of the
PnP/PCI Options
to Yes,
then reboot the system.
3. Remove all adapter cards that are NOT factory-
installed, then reboot the system.
PS/2 Pointing Device Interface Error
PS/2 Pointing Device Error 1. Re-connect PS/2 keyboard and mouse.
2. Enter BIOS Setup and load the default settings.
3. PS/2 mouse
4. PS/2 keyboard
5. System board
DMI Table Was Destroyed 1. Flash BIOS
Press “DEL” key to enter Setup or F1 key to continue 1. Press DEL to enter Setup and reconfigure the system.
Press ESC to turn off NMI, or any key to reboot 1. Press ESC to reject NMI error or press any other key
to reboot the system.
Insert system diskette and press ENTER key to
reboot 1. Insert a bootable disk into the floppy disk drive or
remove this disk if a hard disk is installed.
BIOS Messages Action/FRU