background image

26

Chapter 2

System Information

The following screen appears if you select System Information from the main menu.

This page shows the current basic configuration of your system.

The following table describes the parameters found in the System Information pages:

Parameter

Description

Format

Processor

Specifies the type of processor currently installed in 
your system.  

Processor Speed

Specifies the speed of the processor currently installed 
in your system.  

Speed in MHz

Level 1 Cache

Specifies the first-level or the internal memory (i.e., the 
memory integrated into the processor) size, and 
whether it is enabled or disabled.

Cache size in KB

Level 2 Cache

Specifies the second-level cache memory size currently 
supported by the system.  

Cache size in KB

Diskette Drive A 

Shows the diskette drive A type.  

Capacity, dimension

Diskette Drive B

Shows the diskette drive B type.  

Capacity, dimension

IDE Primary Channel Master Specifies the current configuration of the IDE device 

connected to the master port of the primary IDE 
channel.  

Drive type, capacity 

IDE Primary Channel Slave

Specifies the current configuration of the IDE device 
connected to the slave port of the primary IDE channel.  

Drive type, capacity 

IDE Secondary  Channel 
Master

Specifies the current configuration of the IDE device 
connected to the master port of the secondary IDE 
channel.  

Drive type, capacity 

IDE Secondary  Channel 
Slave

Specifies the current configuration of the IDE device 
connected to the slave port of the secondary IDE 
channel.  

Drive type, capacity 

 

System Information

 

Processor ................................................................ Pentium III
Processor Speed ...................................................... 500E MHz
Level 1 Cache  ......................................................... 32 KB, Enabled
Level 2 Cache.......................................................... 256 KB, Enabled
Diskette Drive A ..................................................... 1.44 MB 3.5-inch
Diskette Drive B  ..................................................... None
IDE Primary Channel Master  ................................. Hard Disk, 4311 M.B.
IDE Primary Channel Slave  ................................... None
IDE Secondary Channel Master  ............................. None
IDE Secondary Channel Slave  ............................... IDE CD-ROM
Total Memory.......................................................... 56 MB + 8192 KB Share Memory
  1st Bank ................................................................ SDRAM, 32 MB
  2nd Bank  .............................................................. SDRAM, 32 MB

Serial Port 1............................................................. Disabled
Serial Port 2............................................................. 3F8h, IRQ 4
Parallel Port ............................................................ 378h, IRQ 7
PS/2 Mouse  ............................................................ Installed

Summary of Contents for Power Sc






















































































































Reviews: