Index
95
4.3
Disassembling and Reassembling the System
When upgrading, you may need to disassemble your system in order to access the system board and other
components inside the system.
To disassemble the system:
1.
The metal cover inside the housing gives additional support to the housing’s structure. To remove the metal
cover, remove two screws located on the inner side of the metal bracket (the screw attaches the metal bracket
to the riser card). Insert two fingers into the hole and gently draw it back as you lift it up.
Figure 4-5 Detaching the Metal Cover
Metal Cover
Riser Card
