manualshive.com logo in svg

Acer PE270K, User Manual

Share
Download
Acer PE270K User Manual Download Page 18

PE270K  User Guide English

8

Connecting the cables

To install the monitor on your host system, please follow the steps below:
1.  Turn off your computer and unplug your computer's power cord.
2. 

Connect the signal cable to the DP (optional) and/or HDMI (optional) input 

socket of the monitor, and the DP (optional) and/or HDMI (optional) output 

socket of the graphics card on the computer. Then tighten the thumbscrews on 

the signal cable connector.

3. 

USB 3.0 Type C-C Cable (Optional, USB Type-C-C input models only) 

 

Connect one end of the USB 3.0 type C-C cable (optional) to your computer and 

connect the other end to your electric devices.

4. 

Connect the USB Cable(Optional) 

 

Connect the USB 3.0 cable to port for fast charge. 

Connect the USB 3.0 cable to port.

5.  Optional: Connect the audio input socket (AUDIO IN) of the LCD monitor and 

the line-out port on the computer with the audio cable.

6.  Insert the monitor power cable into the power port at the back of the monitor.
7.  Plug the power cords of your computer and your monitor into a nearby electrical 

outlet. 

 

Note: 

Audio output is only for audio output model. Please check user   manual for more 

instruction.

FreeSync (HDMI/DP):

It can allow a FreeSync supported graphics source to dynamically adjust display 

refresh rate based on typical content frame rates for power efficient, virtually stutter 

free and low-latency display update.

Summary of Contents for PE270K


































Reviews:

No comments

Brands by name

Popular brands

Load more brands