11
... English
Installation
Power/Standby
Powering On the Projector
1.
Remove the lens cap.
2.
Ensure that the power cord and signal cable are securely
connected. The Power LED will turn
red
.
3.
Turn on the lamp by pressing “Power/Standby” button on
the control panel.
n
The startup screen will display for 30 seconds and the
Power LED will flash
green
.
When the startup screen disappears, the Power LED will
turn
green
.
4.
Turn on your source (computer, notebook, video player, etc.).
The projector will detect your source automatically.
If the screen displays “No Signal”, please make sure the signal
cables are securely connected.
If you connect multiple sources at the same time, using the
“Source” button on the control panel to switch.
Powering On/Off the Projector
Turn on the
projector first and then
the signal sources.
1
