background image

33

... English

Replacing the lamp

The projector will detect the lamp life itself.  It will show you 

a warning message “Lamp is approaching the end of its useful 

life in full power operation. Replacement Suggested!” When 

you see this message, changing the lamp as soon as possible.  
Make sure the projector has been cooled down for at least 30 

minutes before changing the lamp. 

Warning:

 Lamp 

compartment is hot!  

Allow it to cool down 

before changing lamp!

Warning: 

To reduce 

the risk of personal 

injury, do not drop the 

lamp module or touch 

the lamp bulb. The bulb 

may shatter and cause 

injury if it is dropped.

 

1

3

4

 

2

 

Lamp Changing Procedure:

 

 

1. Turn the power off the projector by pressing the Power    

 button.

 

2. Allow the projector to cool down at least 30 minutes.

 

3. Disconnect the power cord.

4.  Use a screwdriver to remove the screw from the cover.

 

5.  Push up and remove the cover. 

 

6.  Remove the 2 screws from the lamp module.

 

7.  Pull out the lamp module. 

 

 

To replace the lamp module, reverse the previous steps.

Appendices

Summary of Contents for PD100




































Reviews: