manualshive.com logo in svg

Acer Packard Bell dot M Series, Service Manual, Page: 6 / 92

Share
Download
Acer Packard Bell dot M Series Service Manual Download Page 6

Main Module Reassembly Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

Replacing the Thermal Module  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

Replacing the Mainboard   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64

Replacing the CPU Fan   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66

Replacing the Speaker Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67

Replacing the LED Board  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

Replacing the Bluetooth Module  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71

Replacing the LCD Module  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72

Replacing the LAN Board  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75

Replacing the CRT Board  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77

Replacing the Card Reader Board  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78

Replacing the TouchPad Bracket and Button Board   . . . . . . . . . . . . . . . . . . . . .80

Replacing the Upper Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81

Removing the Hinge Covers  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84

Removing the Keyboard  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85

Reassembling External Modules   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86

Replacing the WLAN Board   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86

Removing the DIMM Module   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87

Replacing the Hard Disk Drive Module  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88

Replacing the Lower Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90

Replacing the Battery Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92

6

Summary of Contents for Packard Bell dot M Series





























































































Reviews:

No comments