background image

16

En

gl

ish

User Controls

Installation menu

The installation menu provides an onscreen display (OSD) for projector 
installation and maintenance. Use the OSD only when the message "No signal 
input" is displayed on the screen. 

The menu options include settings and adjustments for screen size and distance, 
focus, keystone correction and more .

1

Turn on the projector by pressing "Power" button on the control pad.

2

Press the menu button on the control pad to launch the OSD for projector 
installation and maintenance.

 

3

The background pattern acts as a guide to adjusting the calibration and 
alignment settings, such as screen size and distance, focus and more .

4

The Installation menu includes the following options:

•Projection method

•Keystone settings

•Language settings

•Control Channel settings

•IP / Mask settings

•Reset to factory default function

Use the up and down arrow keys to select an option, the left and right 
arrow keys to adjust selected option settings, and the right arrow key to 
enter a submenu for feature setting. The new settings will be saved 
automatically upon exiting the menu.

5

Push the menu button anytime to exit the menu and return to the Acer 
welcome screen.

 

 

 

Downloaded From projector-manual.com Acer Manuals

Summary of Contents for P7213




























































Reviews: