Use a Phillips-head screwdriver screwed the
No.1~4 screws till that interface board and bracket
chassis base firmly attached.
Use a Phillips-head screwdriver screwed the
No.1~4 screws till that power board and bracket
chassis base firmly attached.(No1 screw
size=M4x8; No2~4 screw size=M3x6;
Torque=9~10KGFxCM).
Take a bracket chassis base on a protective
cushion and stick an insulator on the specific
position, take a power board and turn it over. Then,
put it on the specific positions of bracket chassis
base.
Connect the cable between power board(P802)
and interface board (P301)
Connect the function key cable into interface
board(P306)
Connect the FFC cable into interface board
Take the key function cable out from the hole
shown as photo
Fix the function key cable with a PVC tape
Turn the monitor faced down and put it on the
Bracket Chassis module till both parts firmly
Take lamp cables out from the holes shown as
the photo.
Connect the FFC cable to the connector of the LCD
panel.
S5
S3
S2
S1
1
2
3
4
4.1 Assembly procedures:
4. Assembly and Disassembly Procedures
P301
P802
P306
FFC
1
2
3
4
S4
S7
S6
12
Go to cover page
ACER P203W
