manualshive.com logo in svg

Acer P1266P, Service Manual

Share
Download
Acer P1266P Service Manual Download Page 43

Confidential

2-20

P1166 / P1266 / P1266i / P1166P / P1266P

    (“screw 1“ should be asjusted first, and 
    then “screw 2“. Adjust until the  
    yellowish or bluish parts disappeared.)
3. Abnormal image inspection
    -  It should not have any abnormal color at 

the rim of the image by estimating through 

the eyes. 

Note:  - To avoid over adjusting the rod. 
 

-  After the opreation, please use the 

glue to fix the screws. 

2-22  Re-write Lamp Usage 

Hour

1. Get into service mode
    -  Press (power→left→left→menu) to get 

into service mode

2. Select “RD Menu”.
3.  The “Lamp Life Calculate Hours“ = “Full 

Mode Hours Test“ + “Eco Mode Hours 

Test“.

    Select “Full Mode Hours Test”, then use 
    left or right key to re-write the lamp hour 
    back to previous lamp usage hour.
    The way of re-writing “Eco Mode Hours    
    Test“ is the same as “Full Mode Hours 

Check the lamp 

usage hour

 

Summary of Contents for P1266P































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands