background image

English

8.  Blue Light: Filters out blue light to protect your eyes by adjusting how much blue light is 

shown -- 80%, 70%, 60%, or 50%.

 

-----------------------------------------------------------------------------------------------------------

Note: 

A higher value allows more blue light to pass through, so in order to 

achieve the best protection, please select a lower value, of which 50% is in the 

best state and has been tested by TÜV Rheinland and meet the requirements of TÜV 

Rheinland's “Low Blue Light Content” standard.

9.  ACM: Turn ACM on or off.  

-----------------------------------------------------------------------------------------------------------

 

Note:

 Set to "On", will be based on the current screen to dynamic contrast adjustment.

10.  Super Sharpness: Turn the Super Sharpness On or Off. Super Sharpness technology 

can simulate high-resolution images by boosting the pixel density of the original source 

to make images sharper and clearer.

HDR function

•  Hot Key of Mode:

Action

Racing

Sports

User

HDR

Graphics

ECO

Standard

Modes

OK

Move

Brightness

80

Input

HDMI(2.0)

Menu

Mode

Standard

•  Main Menu of HDR: 

Mode - User

80

Off

Off

50

Brightness

Contrast

Blue Light

ACM

Off

Super Sharpness

Picture

Enter

Move

9

Black Boost

Color

OSD

System

Save Settings to...

Audio

Gaming

X

Off

HDR

Summary of Contents for NITRO XV272






























Reviews: