EN-20
9.
DDC/CI: Allows the monitor settings to be set through the software on
the PC.
10. HDMI Black Level: You can select the level of blackness under HDMI
source. The options are Normal and Low.
11. Quick Start Mode: Enable monitor rapidly.
12. Over Clock: Turn this function On to support refresh rate at 280 Hz. The
default is Off.
Product information
1.
From any function page, press the
key to open the OSD.
2.
Reset All Settings: Reset all settings to the factory defaults.
Note: DDC/CI, short for Display Data Channel/Command Interface,
which allows monitor controls to be sent via software.
Note: When Over Clock is On, FreeSync Premium is automatically
turned off.
