EN-17
Adjusting the Performance
1.
Press the MENU button to open the OSD.
2.
Using the Navi/OK button, select Performance from the OSD. Then
navigate to the setting you wish to change.
3.
Use the Navi/OK button to select the setting.
4.
Over Drive: Select Off, Normal, or Extreme.
5.
FreeSync: Select On or Off. FreeSync is available for AMD supported
graphic cards only.
6.
Refresh Rate Num: Display the panel’s current refresh rate on the screen.
7.
VRB: When VRB is Extreme or Normal, VRB provides a sharper and clearer
dynamic picture; the default is Off.
Note:
1. If FreeSync is “ON”, then the Over Drive selection is set to
“Normal” automatically
2. If FreeSync is “OFF”, then the user can set Over Drive to either
one of the three settings including: (a) Extreme (b) Normal (c) Off
•
VRB does not support PIP/PBP Mode and HDR Mode. (Selective
models)
•
When VRB is Extreme or Normal, FreeSync is automatically
turned off.
•
VRB will affect the brightness of the following: Logo, Aim Point,
Message and Input Icon.
•
VRB feature is dependent on the monitor’s maximum refresh
rate. For monitors supporting up to 75 Hz, VRB is available
when the refresh rate is set to 75 Hz only.
Summary of Contents for KA Series
Page 1: ...Acer LCD Monitor User s Guide ...
Page 33: ...KA270 KA270 Jul 23 2021 2021 ...
