ACER K222HQL
10
4.2 Assembly Procedures
Preparation before assemble:
1.Clean the room for work
2.Identify the area for material
3.Prepare the implement, equipment, materials as bellow
：
1) working table
2) Screw-driver
3) Knife
4) glove
5) cleaning cloth
6) ESD protection
After unplugging the power cord, the power board still have power energe. Please pay attention when
disassembling/assembling Power BD.
S1
Assemble the MAIN board,
power board and SPK.
Before Disassembling & Assembling, monitor need to be put on the sponge
and the Insulation glove must be wore during the process.
Insert
the FFC to the I/F.
Insert the DP-Wire to the I/F BD and the Power BD.
Insert the Power BD-Wire and SPK-Wire to I/F BD,
Place the I/F BD and the Power BD to main SHD.
Lock all screws as the picture.
Put Mylar on the Power BD.
S2
Assemble the ASSY TRIM
Insert the C/B-FFC to C/B as circle frame, and insert them into the BZL
Assemble the panel on the BZL
Stick Mylar on C/B FFC as square frame and Insert the C/B-FFC to the PCBA as
circle frame.
PICTURE 1
PICTURE 2
I/F BD
P/BD
I/F BD
P/BD
