Diagnostic Utilities
2-7
8. SD Card
Insert an SD card into the device. The test starts automatically.
If the SD card read-write capability is successful, a message appears on the screen and the test
automatically closes.
Otherwise, “
Failure
” appears on the screen. Tap “
Failure
” if the test fails or “
Retest
” to redo
the test.
Figure 2-10. SD Card Test
9. G-Sensor Test
The G-Sensor Test checks if a G-Sensor module is present or not. If a G-Sensor is preset, the test
will pass automatically.
Figure 2-11. G-Sensor Test