Acer HS244HQ, Lifecycle Extension Manual

Page: 8 / 70

8
This LCD monitor includes an interface board, power board and a function key board. The interface board
controls the TFT panel control logic, brightness control logic, and DC-DC conversion to supply the appropriate
power to the whole board and LCD panel then transmitting LVDS signals into LCD Module to drive the LCD
display circuit. The power board will provide the DC power to the interface board and LCD panel. The function key
board is used for OSD control, monitor power ON/OFF and the LED indicator for power status.
ITEM SPEC
HDMI (Digital Video Interface)
Frequency Ranges
H:
31KHz~151KHz
V:
48Hz~100Hz
Max Pixel clock 550MHz
MHz
Input Impedance 100
Ω
HDMI HDMI 2.0
DP(Display Port)
Frequency Ranges
H:
271KHz - 271KHz
V:
48Hz~180Hz
Max Pixel clock 960MHz
Input Impedance 100
Ω
DP
DP 1.4
Connectors
DC Jack WAFER 2.5mm 4P 90' DIP
Input connectors
HDMI 19pinx2, DisplayPort
20-pin x 2
,
Type-B 3.0 9-
pin x1, Type-C 12-pinx1, Type-A 18-pinx4
Power Consumption
100~240 Vac, 50~60Hz 180W(max)
Power Saving
< 0.5W
Power Off
< 0.3W
User
’s Co n t r o l
Buttons POWER, hot key1, hot key2, input key, menu key
Dimmin g control range (max-min/max) x 100%
100%
Pre-Defined Timing
Preset Timing 15
User
’s Timing
16
Plug and Play
VESA DDCCI
Power Saving
DPMS
Display Color
8bit+A-FRC
Response Time OD Off :5ms/Nomal:3ms/Extreme:1ms
VRB Off :depending on OD
Setting/Normal:3ms/Extreme:1ms
1.3.1 Interface Connectors:
1 .3.1.1 AC SOCKET
The AC inlet connector shall be an IEC/CEE-22 type male power receptacle for connection to mains
power. The power cord shall be black with length of 1.9±0.05 meters. The power cord type is different
from regions.
1.3.1.2 Analog Connector and Cable: The analog signal cable shall be black and 1800 mini-meters. The
analog VGA cable shall be a molded-over, shielded, triple row, 15 pins and blue color D type connector.