8
English
Installation
To install the monitor on your host system, please follow the steps below:
Steps
1 Connect the video cable
a Make sure both the monitor and computer are switched off.
b Connect the digital cable
(1) Make sure both the monitor and computer are switched off.
(2) DVI Cable (Optional, only Dual-Input Model)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the DVT/DVI(Dual Link) cable to the computer.
(3) HDMI Cable (Optional, only HDMI-Input Model)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the HDMI cable to the computer.
(4) DP Cable (Optional, only DP-Input Model)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the DP cable to the computer.
(5) VGA cable (Optional, only VGA-Input model)
a. Make sure both the monitor and computer are powered-OFF
b. connect the VGA cable to the computer
c Connect the audio cable (Optional, only Audio-input Model).
2 Connect the adapter
a Connect the AC cord to the adapter.
b Connect one end of the adapter to the monitor and the other end to a properly
grounded, AC outlet.
3 Turn on the monitor and computer
Turn on the monitor first, then the computer. This sequence is very important.
4 If the monitor does not function properly, please refer to the troubleshooting section
to diagnose the problem.
DP
DVI
HDMI
DC IN
HDMI
DVI
VGA
DP
AUDIO IN
VGA IN
HDMI
HDMI
Note:
Audio output is only for audio output model.
In order to prevent damage to the monitor, do not lift the monitor by its base.
