USER CONTROLS
Power Switch / Power LED:
To turn the monitor ON or OFF.
Lights up to indicate the power is turned ON.
Using the Shortcut Menu
Press the function button to open the shortcut menu. The shortcut menu lets you
quickly select the most commonly accessed settings.
Empowering
:
Press the Empowering Key to open the eColor Management OSD and access
the scenario modes.
AUTO Auto Adjust
:
Press this button to activate the Auto Adjustment function. The Auto Adjustment
function is used to set the HPos, VPos, Clock and Focus.
MENU OSD functions:
Press this botton to activate the OSD menu.
Volume Up/Down:
Press to adjust volume(only Audio-Input Mode)(Optional).
INPUT Input Key:
Use Input key to select from different video sources that may be connected to
your monitor.
(a) VGA input (b)
HDMI(MHL)
input
As you cycle through the sources you will see the following messages on right top
side of screen to indicate currently selected input source. It may take 1 or 2
seconds for the image to appear.
VGA or
If either VGA or
HDMI or MHL
input is selected ,but the VGA and
H
D
M
I
and MHL
l
ables are not
“No Cable Connect” or “No Signal”
(
c
)
HDMI(MHL)
input
HDMI
or
MHL
connected
, a floating dialog box indicates:
9
