Chapter 3
89
15. Carefully lift up the heatsink module.
Removing the CPU
1.
See “Removing the Battery Pack” on page 60.
2.
See “Removing the SD dummy card” on page 60.
3.
See “Removing the ExpressCard dummy card” on page 61.
4.
See “Removing the Lower Cover” on page 61.
5.
See “Removing the DIMM” on page 62.
6.
See “Removing the WLAN Board Modules” on page 63.
7.
See “Removing the Hard Disk Drive Module” on page 64.
8.
See “Removing the Keyboard” on page 67.
9.
See “Removing the Middle Cover” on page 68.
10. See “Removing the LCD Module” on page 70.
11. See “Separating the Upper Case from the Lower Case” on page 74.
12. See “Removing the Main Board” on page 85.
13. See “Removing the CPU and VGA Heatsink Module” on page 88.
14. Using a flat screwdriver, turn the CPU socket latch counter-clockwise to release the CPU.
Summary of Contents for Ferrari 1100 Series
