English
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1. To clean the LCD monitor screen:
•
Turn off the LCD monitor and unplug the power cord.
•
Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage
it.
3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of
any nature.
5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside
this range may result in permanent damage.
6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
•
Monitor-to-PC signal cable is frayed or damaged.
•
Liquid spills onto the LCD monitor or the monitor is exposed to rain.
•
The LCD monitor or case is damaged.
7. In order to prevent damage to the LCD panel, do not place the monitor face down on a surface.
Connecting your monitor to a computer
1. Turn off your computer and unplug your computer's power
cord.
2. Connect the signal cable to the HDMI (optional) and /or
DP (optional) input socket of the monitor, and the HDMI
(optional) and /or DP (optional) output socket of the
graphics card on the computer.
3. USB Type C Cable (Optional, USB Type C input models
only) Connect one end of the USB type C cable (optional)
to your computer and connect the other end to your
electric devices.
4. Connect the USB Cable(Optional)
Connect the cable to the fast charging USB 3.0 port (one)
to charge. The normal USB 3.0 port (three) are for non-
fast charging
.
Connect the USB 3.0/USB-B cable to port.
5. Insert the monitor power cable into the power port at the
back of the monitor.
6. Connect the power adapter and power cord to the monitor,
then to a properly grounded AC outlet.
USB
DP
HDMI 1
DP IN
HDMI 2
USB Type C
Note: Audio output is only for audio output model. Please check user manual for more instruction.
1
2
3
4
5
External controls
1
Power button
Turns the monitor on/off.Amber indicates power on. Blinking amber indicates (Standby/ Power
Saving mode/ OSD locked).
2
Function key
/
a.
Press to view Main page. Press again to enter hotkey1 function.
b.
When the Function Menu is active, press this key to view the basic information for your monitor
and current input or reset the custom color settings to the factory defaults.
3
Function key
/
a.
Press to view Main page.Press again to enter hotkey2 function.
b.
When the Function Menu is active, press this button to select select scenario mode or game
mode .
4
Function key
/
X
a.
Press to view Main page.Press again to enter Input select function.
b.
When the Function Menu is active, this button will quit the OSD.
