Disassembly Procedures
1-21
Mainboard Removal
0
Prerequisite:
1. Disconnect the LED cable from the mainboard connector (A) (
).
2. Disconnect the camera cable from the mainboard connector (B) (
3. Disconnect the microphone cable from the mainboard connector (C) (
4. Disconnect the 20-pin USB board FFC from the mainboard connector (D)
(
).
5. Disconnect the 50-pin USB board FFC from the mainboard connector (E) (
6. Disconnect the keyboard FPC from the mainboard connector (F) (
).
7. Disconnect the touchpad FFC from the mainboard connector (G) (
8. Disconnect the speaker cable from the mainboard connector (H) (
CAUTION
:
!
Make sure all cables, FFCs, and FPC are disconnected from the connectors on
the mainboard to avoid damage during removal.
9. Remove seven (7) screws securing the mainboard and I/O bracket in place
(
).
Figure 1-27. Mainboard Removal
D
E
H
B
C
A
F
G