CG437K User Guide English
3
Connecting the cables
To install the monitor on your host system, please follow the steps below:
1.
Turn off your computer and unplug your computer's power cord.
2.
Connect the signal cable to the HDMI (optional) and /or DP (optional) input socket of
the
monitor, and the HDMI (optional) and /or DP (optional) output socket of the graphics
card on the computer.
3.
USB Type-C Cable (Optional, USB Type-C input models only) Connect one end of the
USB Type-C cable (optional) to your computer and connect the other end to your electric
devices.(power supplier 5V>/3A, 9V>/3A, 15V>/2A, 20V>/1.5A)
4.
Connect the USB Cable(Optional)
Connect the USB cable to port for fast charge.(power supplier BC1.2 >/1.5A)
Connect the USB cable to port.
5.
Optional: Connect one end of the LED Module cable to your computer and connect the
other end to the LED lamp belt.
6.
Insert the monitor power cable into the power port at the back of the monitor.
7.
Plug the power cords of your computer and your monitor into a nearby electrical outlet.
8.
Connecting HDMI/DP+USB-B to computer 1 and USB-C to computer 2 when Control up
to 2 computers from a single set of keyboard and mouse connected to the monitor.
USB
DP
USB Type C
HEADER
LED lamp belt
LED Module cable
-----------------------------------------------------------------------------------------------------------
Note:
• Audio output is only for audio output model. Please check user manual for
more instruction.
•
About the LED lamp belt connection:
When you want to connect the LED lamp belt, remove the silicone pad first.
When you do not need to connect the LED lamp belt, be sure to install the silicone
pad back.
If your computer USB-C do not have DP-Alt, pls connect HDMI/DP+USB-B to computer
1 and HDMI/DP+USB-C to computer 2.
