background image

iv

Accessibility

Be sure that the power outlet you plug the power cord into is easily accessible 
and located as close to the equipment operator as possible. When you need to 
disconnect power from the equipment, be sure to unplug the power cord from 
the electrical outlet.

Safe listening

To protect your hearing, follow these instructions.

Gradually increase the volume until you can hear it clearly and comfortably 
and without distortion.

After setting the volume level, do not increase it after your ears have 
adjusted.

Limit the amount of time listening to music at high volume.

Avoid turning up the volume to block out noisy surroundings.

Turn the volume down if you can't hear people speaking near you.

Warnings

Do not use this product near water.

Do not place this product on an unstable cart, stand or table. If the product 
falls, it could be seriously damaged.

Slots and openings are provided for ventilation to ensure reliable 
operation of the product and to protect it from overheating. These 
openings must not be blocked or covered. The openings should never be 
blocked by placing the product on a bed, sofa, rug or other similar surface. 
This product should never be placed near or over a radiator or heat 
register, or in a built-in installation unless proper ventilation is provided.

Never push objects of any kind into this product through cabinet slots as 
they may touch dangerous voltage points or short-out parts that could 
result in a fire or electric shock. Never spill liquid of any kind onto or into 
the product.

To avoid damage of internal components and to prevent battery leakage, 
do not place the product on a vibrating surface.

Never use it under sporting, exercising, or any vibrating environment 
which will probably cause unexpected short current or damage internal 
devices.

Using electrical power

This product should be operated from the type of power indicated on the 
marking label. If you are not sure of the type of power available, consult 
your dealer or local power company.

Do not allow anything to rest on the power cord. Do not locate this 
product where people will walk on the cord.

If an extension cord is used with this product, make sure that the total 

Summary of Contents for B326HK































Reviews: