ACER B246HL
9
S3
Disassemble the lamp wire
Tear off the tape on the lamp wire. Extract the big connector of the lamp wire form the
P/BD(Power Board) as the picture.
S4
Disassemble the USB
SIDE BD
(This step is only for SKU
with USB)
Tear off the Mylar on the right hole of the SHD as picture 1. Disassemble USB-FFC from
the USB BD. Unlock the screw from the USB SIDE BD and disassemble the USB SIDE
BD. Disassemble the USB-FFC from the USB SIDE BD as picture 2. Disassemble the
gasket from the back of the panel as picture 3.
PICTURE 1 PICTURE 2 PICTURE 3
S5
Disassemble LVDS
CABLE and CTRL BD
Tear off the tape, pull out the FFC as picture 1. Pull the
CTRL BD
-FFC out of the PCBA
and the
CTRL BD
, tear off the tape, disassemble the
CTRL BD
-FFC
PICTURE 1 PICTURE 2
USB
SI
D
E B
o
ar
d
USB
B
o
ar
d
