background image

English

INPUT

-   VOLUME   +

-   CHANNEL   +

MENU

POWER

INPUT

-   VOLUME   +

-   CHANNEL   +

MENU

POWER

INPUT

-   VOLUME   +

-   CHANNEL   +

MENU

POWER

INPUT

-   VOLUME   +

-   CHANNEL   +

MENU

POWER

Important safety instructions

Read these instructions carefully. Please put them somewhere 
safe for future reference.

1  Follow all warnings and instructions marked on the product.

2  Unplug this product from the wall outlet before cleaning. 

Do not use liquid cleaners or aerosol cleaners. Use a damp 
cloth for cleaning.

  Do not use this product near water.

4  Do not place this product on an unstable cart, stand or 

table. The product may fall, sustaining serious damage.

5  Slots and openings are provided for ventilation; to 

ensure reliable operation of the product and to protect 
it from overheating, these openings must not be blocked 
or covered. The openings should never be blocked by 
placing the product on a bed, sofa, rug or other similar 
surface. This product should never be placed near or over 
a radiator or heat register or in a built-in installation 
unless proper ventilation is provided.

6  This product should be operated from the type of power 

indicated on the marking label. If you are not sure of 
the type of power available, consult your dealer or local 
power company.

7  Do not allow anything to rest on the power cord. Do not 

locate this product where the cord will be stepped on.

8  If an extension cord is used with this product, make sure 

that the total ampere rating of the equipment plugged 
into the extension cord does not exceed the extension 
cord ampere rating. Also, make sure that the total rating 
of all products plugged into the wall outlet does not 
exceed the fuse rating.

9  Never push objects of any kind into this product through 

cabinet slots as they may touch dangerous voltage points 
or short-out parts, which could result in a fire or electric 
shock. Never spill liquid of any kind on the product.

10  Do not attempt to service this product yourself, 

as opening or removing covers may expose you to 
dangerous voltage points or other risks. Refer all servicing 
to qualified service personnel.

11  Unplug this product from the wall outlet and refer 

servicing to qualified service personnel under the 
following conditions:

a. When the power cord or plug is damaged or frayed.

b. If liquid has been spilled into the product.

c.  If the product has been exposed to rain or water.

d. If the product does not operate normally when the 

operating instructions are followed. Adjust only those 
controls that are covered by the operating instructions.
Improper adjustment of other controls could result 
in damage; extensive work by a qualified technician 
might then be required to restore the product to 
normal condition.

e. If the product has been dropped or the case has been 

damaged.

f.  If the product exhibits a distinct change in 

performance, indicating a need for service.

12  Use only the proper type of power supply cord set 

(provided in your accessories box) for this unit. Always 
disconnect the power cord from the wall outlet before 
servicing or disassembling this equipment.

1. Do not overload an electrical AC outlet, power strip, or 

convenience receptical. The overall system load must not 
exceed 80% of the branch circuit rating. If power strips 
are used, the load should not exceed 80% of the power 
strip input rating. 

14  Some products are equipped with a three-wire electrical 

grounding-type plug that has a third pin for grounding. 
This plug only fits into a grounded electrical outlet. This 
is a safety feature. Make sure the AC outlet is properly 
grounded. Do not defeat the safety purpose of the 
grounding-type plug by trying to insert it into a non-
grounded outlet. If you cannot insert the plug into the 
outlet, contact your electrician to replace the obsolete 
outlet.

The grounding pin is an important safety feature. 
It is possible to receive an electric shock from a 
system that is not properly grounded

The grounding pin is also providing good immunity 
ability against unexpected noise that interferes 
performance of this product and is produced by 
other nearby electrical devices.

AT201X.EU.UK.indb   3

3/21/2006   8:07:23 PM

Summary of Contents for AT2010




























Reviews: