![background image](http://html.mh-extra.com/html/acer/at110-series/at110-series_user-manual_6156051.webp)
35
and B2.
Independent mode:
Single processor configuration
Observe the population sequence illustrated in the table below when
installing memory modules.
To remove a DDR2 unbufferred DIMM:
Important: Before removing a DDR2 unbufferred DIMM, make
sure to back up all important system files.
1
Perform the pre-installation instructions described on page 22.
2
Lay the server on its side (components showing).
3
Remove the DIMM.
(1) Press the holding clips on both sides of the socket outward to
release the DIMM.
Total Capacity
DIMM A1
DIMM A2
DIMM B1
DIMM B2
1 GB
1 GB
2 GB
2 GB
2 GB
1 GB
1 GB
4 GB
2 GB
2 GB
4 GB
1 GB
1 GB
1 GB
1 GB
8 GB
2 GB
2 GB
2 GB
2 GB
Summary of Contents for AT110 Series
