Acer Aspire SA85 Service Manual Download Page 35

Page: 35 / 88

Chapter 2

Advanced BIOS Features

The following screen shows the Advanced BIOS Features:

The following table describes the parameters found in this menu. Settings in

boldface

are the default and

suggested settings.

Parameter

Description

Options

Silent Boot

Display Full Screen LOGO during POST

Enabled

Disabled

Configuration Table

Enable the Configuration Table function

Enabled

Disabled

CPU Feature

Select to display CPU Feature

Press [Enter]

Hard Disk Boot Priority

Select Hard Disk Boot Device Priority

Press [Enter]

CPU L1 & L2 Cache

Uses internal level 1 (L1) and external level 2
(L2) cache memory to improve performance.

Enabled

Disabled

Hyper-Threading
Technology

Enable the Hyper-Threading function

Enabled

Disabled

Quick Power On Self Test

This parameter speeds up POST by skipping
some items that are normally checked.

Enabled

Disabled

First /Second/Third Boot
Device

The items allow you to set the sequence of boot
device where BIOS attempts to load the disk
operating system.

Floppy, LS120, Hard Disk, CD-ROM,
ZIP100, USB-FDD, USB-ZIP, LAN,
Disabled (Disable this sequence).
The sequence following the order of
Floppy, HDD and CD-ROM is
recommended.

Boot Other Device

This parameter allows you to specify the system
boot up search sequence.

Enabled

Disabled

Silent Boot

[ Enabled ]

Item Help

Configuration Table

[ Disabled ]

Menu Level

CPU Feature

[ Press Enter ]

Hard Disk Boot Priority

[ Press Enter ]

CPU L1 & L2 Cache

[ Enabled ]

Quick Power On Self Test

[ Enabled ]

First Boot Device

[ Floppy]

Second Boot Device

[ Hard Disk]

Third Boot Device

[CDROM]

Boot Other Device

[ Enabled ]

Swap Floppy Drive

[Disabled]

Boot Up Floppy Seek

[Enabled]

Boot Up NumLock Status

[ On ]

Gate A20 Option

[ Fast ]

ATA 66/100 IDE Cable Ms

[ Enabled]

Typematic Rate Setting

[ Disabled ]

x Typematic Rate (Chars/Se

x Typematic Delay (Msec)

250

Security Option

[Setup]

APIC Mode

[ Enabled]

OS Select For DRAM > 64

[ Non-OS2]

HDD S.M.A.R.T Capability

[Disabled]

Video BIOS Shadow

[Enabled]

Phoenix - AwardBIOS CMOS Setup Utilitye

KLIJ

: Move Enter: Select +/-/PU/PD: Value F10:Save ESC: Exit F1: General Help

F5: Previous Values F7: Optimized Defaults

Advanced BIOS Features

Summary of Contents for Aspire SA85

























































































Search results

Summary of Contents for Aspire SA85

Reviews:

Related manuals for Aspire SA85

Brands by name

Popular brands

Acer Aspire SA85, Service Manual

Search results

Summary of Contents for Aspire SA85

Reviews:

Related manuals for Aspire SA85

Brands by name

Popular brands