23
Advanced Setup
The following screen shows the Advanced Setup:
The following table describes the parameters found in this menu.
Parameter
Description
Options
Quick Boot
Allows BIOS to skip certain tests while
booting. This will decrease the time needed
to boot the system
[Enabled],
[Disabled]
1 st Boot Device
2 nd Boot Device
The item allows you to see the sequence of
boot device where BIOS attempts to load
the disk operation system.
Hard Disk Drives
CD/DVD Devices
Specifies the boot device. Priority
sequence from available Hard Drives
Boot up Num-Lock On Select Power-on state for Numlock
On,Off
USB Beep Message
Enables the beep during USB device
enumeration
[Enabled],
[Disabled]
Reset Configuration Data [NO]
Quick Boot Enabled
Quiet Boot Enabled
1 st Boot Device [HDD:P0-WDC WD10EAV]
2 nd Boot Device [CD/DVD:P1-HL-DT-ST]
Hard Disk Drives [Press Enter]
CD/DVD Devices [Press Enter]
Boot up Num-Lock On
USB Beep Message Disabled
Item Help
KLIJ
: Move Enter: Select +/-/: Value F10: Save ESC: Exit
F1: General Help F9:
Optimized Defaults
CMOS Setup Utiliyt – Copyright (c) 1985-2008,American Megatrends, Inc.
Advanced BIOS Features
Clear NURAM during System Boot.
