Acer Aspire M3800, Service Manual

Page: 27 / 62

21
Advanced Setup
The following screen shows the Advanced Setup:
The following table describes the parameters found in this menu.
Parameter Description Options
Quick Boot Allows BIOS to skip certain tests while
booting. This will decrease the time needed
to boot the system [Enabled],
[Disabled]
1 st Boot Device
2 nd Boot Device
3 rd Boot Device
4 th Boot Device
The item allows you to see the sequence of
boot device where BIOS attempts to load
the disk operation system.
Hard Disk Drive
Priority
Optical Disk Drive
Priority
Removable Device
Priority
Specifies the boot device. Priority
sequence from available Hard Drives
Boot up Num-Lock On Select Power-on state for Numlock On,Off
USB Beep Message Enables the beep during USB device
enumeration [Enabled],
[Disabled]
Quick Boot Enabled
Quiet Boot Enabled
1st Boot Device [ST3750630AS]
2nd Boot Device [P1-HL-ST BDDVDR]
3rd Boot Device [Generic USB]
4th Boot Device [LAN]
Hard Disk Drive Priority [Press Enter]
Optical Disk Drive Priority [Press Enter]
Removable Device Priority [Press Enter]
Boot up Num-Lock On
USB Beep Message Disabled
Item Help
KLIJ
: Move Enter: Select +/-/: Value F10: Save ESC: Exit
F1: General Help F9:
Optimized Defaults
CMOS Setup Utility Copyright (c) 1985-2008,American Megatrends, Inc.
Advanced BIOS Features
Allows BIOS to skip certain tests while
Booting .This will decrease the time
needed to boot the system.