![background image](http://html.mh-extra.com/html/acer/aspire-m1610/aspire-m1610_service-manual_5948045.webp)
Chapter 2
37
PC Health Status
The following screen shows the PC Health Status parameters and their default settings:
The following table describes the parameters found in this menu:
Parameter
Description
Options
CPU Warning
Temperature
This item lets you select the temperature at which
you want the system to send out a warning
message to the PC speakers of when the
temperature goes beyond either limit.
Disabled
CPU Shutdown Temp.
This option is for setting the shutdown temperature level for the processor. When
the processor reaches the temperature you set, the system will be shut down.
SYS Shutdown Temp.
This option is for setting the shutdown temperature level for the system. When the
system reaches the temperature you set, the ACPI-aware system will be shut down.
CPU Core Voltage to
SYS Fan Speed
These items in light blue show various current system voltage, temperature, and
speed measurements. These items are read only and cannot be altered.
Smart FAN Control
Enable smart fan control function.
--When the CPU temperature is higher than 65
degrees Celsius, CPU fan will run at full speed.
--The speed of CPU fan will increase linearly
depend on the temperature if the temperature is
more than 41 degree and less than 65 degree.
--When the CPU temperature is lower than 40
degrees Celsius, CPU fan will be disable.
Enabled
Disabled
F1: General Help F5: Previous Values F7: Optimized Defaults
Smart FAN Control [Enabled]
KLIJ
:Move Enter: Select +/-/PU/PD :Value F10: Save and Exit ESC:Exit
CPU Temperature 21°C
SYS Temperature 36°C
CPU Fan Speed 881 RPM
SYS Fan Speed 919 RPM
+5.0V 4.91V
+12V 11.96V
DIMM Voltage 1.77V
+3.3V 11.84V
SYS Shutdown Temperature [70°C/150°F]
Menu Level
X
CPU Core Voltage 1.28V
Phoenix - AwardBIOS CMOS Setup Utility
PC Health Status
CPU Warning Temperature [70°C/150°F]
Item Help
CPU Shutdown Temperature [90°C/194°C]
Summary of Contents for Aspire M1610
