![background image](http://html.mh-extra.com/html/acer/aspire-2010/aspire-2010_user-manual_5845099.webp)
89
En
gli
sh
E
n
glish
The printer does not work.
Check the following:
•
Make sure that the printer is connected to a power outlet and it is
turned on.
•
Check that the cable is properly connected to the appropriate
ports on both the computer and the printer.
•
If you are using a printer connected to your computer's parallel
port, restart the computer. Windows needs to find the new
hardware and install the necessary drivers.
I want to set up my location to use the internal modem.
Follow these steps:
•
Click on
Start
, and then click on
Control Panel
.
•
Double-click on
Phone and Modem Options
.
•
In the
Dialing Rules
tab, begin setting up your location.
Refer to Windows Help for more information.
When the battery is 95-99% full, it won't charge to 100% capacity.
To preserve the life of the battery, the system only lets you charge the
battery when its capacity falls below 95%. It is recommended that you
run down the battery, and then fully recharge it.
Summary of Contents for Aspire 2010
